INTERNAL GEAR PUMP(NYP SERIES)
The crescent cover, shell, and bracket of NYP series gear pump may be equipped with insulation jacket, and the positions to be insulated may be selected upon actual demand. Jacket is casted as a whole, has good heat preservationeffect, and could avoid various problems arising from jacket welding. For heating: It is available to reserve heat by charging various thermal media such as hot steam and heat conduction oil, etc. into the jacket; for cooling down: It is available to maintainthe constant temperature of the pump body through various cooling liquids. NYP high-viscosityheat preservation pump has the following advantages:
1. The pump could be repaired, replaced, and upgraded conveniently, the bearing part is an integral part, and the whole seal cavity may be screwed off only by unscrewing the top screw.
2. The clearance at the tail part of gear may be adjusted conveniently. NYP high-viscosity pump may, upon the demand of viscosity, achieve the technical requirements under different viscosities by adjusting gear clearance.
The clearance may be adjusted easily only by rotating the bearing housing.
3. The stuffing may be adjusted and replaced conveniently: This model of pump has a broad bracket cavity, so it isavailable to adjust and replace the stuffing without dismantling the pump.
4. Some important parts may be changed to various high-temperature-resisting, anti-wear, anti-corrosion, anti-highpressure, and self-lubricating materials upon technical demand.
5. The heat-preservation jacket is cast as a whole, and has good heat preservation effect and zero leakage.
The NYP series pumps manufactured by the Company have been widely applied to the conveying industry of various fluids,and are especially applicable to the conveying of the fluids with great changes in viscosity and in a broad scope. Applicationindustries: They may be applied to convey pure fluids with certain viscosity, and may be used to convey oils, such as lubricating oil and crude oil, etc.; also, they may be used to convey high-viscosity materials not containing particular impurities, such as rubber, asphalt, paint, binding agent, dyestuff, coating, lubricant, polybasic alcohol, food, and drugs, etc..
NYP series insulation high viscosity pump Basic technical parameters table
NYP series installation size
NYPZ series insulation high viscosity pump Basic technical parameters table
NWCB series Basic technical parameters table
Address: No.85, Shiniu Road, Shuige Industrial Zone, Lishui City, Zhejiang Province
Tel-Phone：0578-2993666 2993555 Wuxi Office：0510-8560303
Focus on us