What specifications does the KCB stainless steel gear pump have?


Release time:

2025-02-14

The flow specifications of KCB stainless steel gear pumps are usually expressed in units of "m³/h" or "L/min".

1. Flow Specification
The flow specifications of KCB stainless steel gear pumps are usually expressed in units of "m³/h" or "L/min". Common flow specifications include but are not limited to the following types:
KCB-18.3: Flow is approximately 1.1m³/h or 18.3L/min
KCB-33.3: Flow is approximately 2m³/h or 33.3L/min
KCB-55: Flow is approximately 3.3m³/h or 55L/min
KCB-83.3: Flow is approximately 5m³/h or 83.3L/min
KCB-200: Flow reaches larger values, such as 12m³/h, etc.
And other larger flow specifications, such as KCB-300, KCB-483.3, KCB-633, KCB-960, KCB-1200, KCB-1600, etc., with a wide range of flow.
2. Pressure Specification
The pressure specifications of KCB stainless steel gear pumps are usually expressed in units of "Mpa". Different specifications of pumps have different discharge pressures. For example:
The discharge pressure of KCB-18.3 is 1.45Mpa.
The discharge pressure of KCB-33.3 is also 1.45Mpa (but note that the specific pressure may vary depending on the pump type and manufacturer).
The discharge pressure of KCB-55 may be lower, such as 0.33Mpa.
Other specifications of pumps also have their corresponding discharge pressures, and the specific values should refer to the technical parameters provided by the manufacturer.
3. Other Specification Parameters
In addition to flow and pressure, KCB stainless steel gear pumps also have other important specification parameters, such as speed, efficiency, motor power, etc. These parameters together determine the performance and application range of the pump. For example:
Speed: Usually 1400r/min or 1420r/min, but different specifications of pumps may have different speed requirements.
Efficiency: Reflects the energy conversion efficiency of the pump, usually above 40%.
Motor Power: Matched according to the flow and pressure requirements of the pump, common powers include 1.5KW, 2.2KW, 5.5KW, etc.
4. Installation and Size
Different specifications of KCB stainless steel gear pumps also vary in installation size and weight. Manufacturers usually provide detailed installation size diagrams and technical parameter tables for users' reference and selection. Users should comprehensively consider and select based on actual usage scenarios and needs.

Related News

Revised "Shanghai Flood Control and Typhoon Emergency Response Specification" Mobile Pump Truck Level III Response Stationary Duty Easy Water Accumulation Points

Recently, the Shanghai Flood Control Command announced the revised "Emergency Response Specifications for Flood Control and Typhoon in Shanghai".

2018-08-08

This technology, kept secret by the United States for half a century, has been conquered by China.

In the construction of various fields such as shipping, nuclear power, and military industry, there is an essential "small part" called a sealing component.

2018-08-08

The import tax policy for major technological equipment has changed!

To enhance the core competitiveness and independent innovation capability of our country's enterprises, accelerate the revitalization of the equipment manufacturing industry, and promote the adjustment and upgrading of the industrial structure.

2018-08-08

What liquids are magnetic pumps suitable for?

The magnetic pump uses magnetic drive, eliminating the need for mechanical seals, thus avoiding leakage issues, making it particularly suitable for transporting volatile liquids.

2025-02-14

What types of chemical centrifugal pumps are there?

There is only one impeller on the pump shaft, suitable for occasions with lower lift and larger flow.

2025-02-14

What are the characteristics and advantages of G-type single screw pumps?

The G-type single screw pump belongs to the rotary volumetric pump, which relies on the engagement between the screw and the bushing to create volume changes in the suction chamber and discharge chamber to transport liquids.

2025-02-14